GM Tech-2 PRO Kit (CANdi & TIS & DONGLE)
The Tech-2 is the same tester GM Technicians use to diagnose GM
vehicles. The Vetronix Tech 2 comes with Authentic GM software and
provides support for on-board diagnostics on all GM systems 1992
Authentic GM software in the Tech 2 Flash means the most
comprehensive diagnostic software available for late model GM
Support for on-board diagnostics on all GM systems 1992 thru
Removable hardware modules provide insurance against scan tool
Large, easy-to-read backlit screen.
RS232 & RS485 ports provide the avenue to connect future
devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record
for later review.
Ability to view the status of vehicle diagnostic tests as they run.
The authentic GM 1992-current year software will provide full
bi-directional control when performing power train, chassis, and
Vetronix Tech-2 Specifications
Microprocessor:32 bit, 16 MHz
Memory:32 MB flash type II PCMCIA. Type III slot available for
Integral RS232 communication port.
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240
pixels. Displays up to 9 vehicle parameters at once
GM Tech-2 Starter Kit with Candi Module & TIS Kit includes (All
ORIGINAL and NEW!):
Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications, one of (NAO V27.005,SAAB
CAN diagnostic interface module(CANdi) and instruction sheet
download ( 199.2 kb )
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
An industry change in protocol from OBD II to Controller Area
Network (CAN) has begun. In order to perform diagnostics on a
vehicle that uses the CAN interface; you will need the Tech 2 Flash
and a CAN diagnostic interface module. The module connects between
the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once
the module is connected, it can be used on all GM vehicle
applications, even those vehicles using other platforms such as OBD
I and OBD II.